The new MICHELIN Pilot Sport CUP2 CONNECT tyre has been designed with an integrated container intended to receive a sensor, which make it the first 100% Connect Ready tyre on the market. Users then just have to insert the MICHELIN Track Connect solution sensors in order to take advantage of the multiple functionalities of the solution and optimize their performance even more during track days. Dedicated to 80% on track and 20% on the road, the MICHELIN Pilot Sport CUP2 CONNECT tyre remain versatile for an everyday use while offering high potential on track.

New architecture for more stability and more security

To combine both excellent feeling and high efficiency, the new MICHELIN Pilot Sport CUP2 CONNECT tyre combines in its construction two polyester plies, two steel plies and a polyamide ply. It also benefits from several advanced technologies :

  • Wavy Summit Architecture: waving of the summit plies by addition of rubber under the structural steel cable of the tyre, giving the advantage of reducing response time and increasing the feeling of sportiness behind the wheel.
  • Dynamic Response Technology: high density aramid and nylon hybrid belt which promotes driving precision and tyre behavior under load. This belt, which is located just below the tread, is both very resistant and light. Thus, at equivalent weight, the associated nylon and aramid are five times more resistant than steel.

These technical improvements allow higher cornering speeds and excellent stability at high speeds. On the track, this also results into better lap times  and more safety on the circuit and on the road.

New tread for better control and longer life

  • Bi Compound Technology: the asymmetrical and non-directional tread pattern of the MICHELIN Pilot Sport CUP2 CONNECT tyre uses “Bi-Compound” technology with at the external side a specific elastomer whose rigidity is adapted to provide maximum grip on dry surfaces when cornering, and inside a more rigid elastomer which optimizes precision and control.
  • High Molecular Chain: the MICHELIN Pilot Sport CUP2 CONNECT tyre benefits from a new rubber compound with “functional elastomers”, allowing to obtain a more homogeneous material and better rolling resistance (energy efficiency), but also a stronger grip on wet ground thanks to a higher dosage of fine silica.
  • Track Longevity Technology 2.0: reinforcements on external shoulder make the tyre more resistant to wear on track and make it possible to increase performance and maintain it lap after lap.

Multiplied benefits on track, even more with MICHELIN Track Connect

Thanks to these technologies, the MICHELIN Pilot Sport CUP2 CONNECT tyre extend not only the driving experience from a subjective point of view (steering control and handling thanks to an optimized footprint) but also in an objective manner. It is indeed 7.29 seconds faster after a serie of 10 laps than the previous MICHELIN Pilot Sport CUP2 tyre. Using MICHELIN Track Connect solution allows - thanks to the optimal pressure recommendations delivered through the app - to drive even faster and consistently with a gain of 7.40 seconds after a serie of 15 consecutive laps.

The BMW M2 CS will be the first car fitted with MICHELIN Pilot Sport CUP2 Connect tyres (245/35 ZR19 (93Y) XL TL PILOT SPORT CUP 2 DT1  MI for the front and 265/35 ZR19 (98Y) XL TL PILOT SPORT CUP 2 DT1  MI for the rear),  meaning that the MICHELIN Pilot Sport CUP2 is the first connect ready tyre homologated as original equipment.

Also available for replacement market in 41 dimensions (95% market coverage) on sizes from 17 to 21 inches, the MICHELIN Pilot Sport CUP2 CONNECT tyre is compatible with the majority of sports cars on the market, from 200 to over 750 HP. It is aimed at beginners or experienced drivers, allowing them to increase their driving experience and improve their lap times on track.

[gallery ids="23300"]